1. Upon receiving the requested box please inspect its contents; there should be the box itself, A roll of tape, 1 bubble pack, Piece of cardboard, and a UPS return shipping label.
2. Using the provided bubble pack, place the notebook inside. Place in the provided box.
Fold the piece of cardboard along the scored lines.
Carefully place the laptop computer at the center of the box/bubble wrap as shown above. Remember to leave room for the AC power adapter inside the box on one side of the box.
Place into the box with the sides facing up.
Insert the laptop charging brick and cables into the box like shown.
Tape box closed to ensure the item is safe for travel.
After the box is secure, take the provided UPS return shipping label and place it over the existing shipping label on the box.
If your box contains a sticker like this, place it on the outside of the box as well.
Once that is done the box is ready to be returned. Return options, and instructions can be found here.
Looking for a different pack & wrap guide?